No products
Prices are tax included
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
Video interface for Ford Sync2.5 (Sync3 Light / R5) with rear and front camera inputs
CI-RL4-SY3-R5
New
Video interface for Ford Sync2.5 (Sync3 Light / R5) with rear and front camera inputs, plug&play harness
Video interface for Ford Sync2.5 (Sync3 Light / R5) with plug&play harness
The r.LINK interface allows to connect a rear-view camera, a front camera and two additional video-sources (e.g. DVD-player, DVB-T tuner, ...) to the factory-infotainment system.
Product features:
- Video-inserter for factory-infotainment systems
- 1 CVBS rear-view camera video-input
- 1 CVBS front camera video-input
- 2 CVBS video-inputs for after-market devices (e.g. USB-Player, DVB-T2 tuner, ...)
- Automatic switching to rear-view camera input on engagement of the reverse gear
- Automatic front camera switching after reverse gear for 10 seconds
- Activatable parking guide lines for rear-view camera (not available for all vehicles)
- Video-in-motion (ONLY for connected video-sources)
- Video-inputs PAL and NTSC compatible
Compatibility:
| Model | Radio / Navigazione |
| Galaxy from 2016 | Sync2.5 (Sync3 Light / R5) version with 6.5inch, 7inch or 8inch tablet monitor. |
| Focus from 2017 | |
| C-Max from 2018 | |
| Kuga from 2018 | |
| Mondeo from 2017 | |
| Mustang da 2017 | |
| Puma | |
| Ranger from 2017 | |
| S-Max from 2016 | |
| Tourneo Custom | |
| Tourneo Connect | |
| Ecosport from 2017 | |
| Fiesta from 07/2017 (MY2018) | |
| Transit | |
| Transit Custom from 2017 | |
| Altri veicoli con SYNC3 |
Limitations:
| Video only | The interface inserts ONLY video signals into the infotainment. For inserting Audio signals either the possibly existing factory audio-AUX-input or a FM-modulator can be used. |
| Picture format | Only compatible with NTSC |
| Factory rear-view camera | Automatically switching-back from inserted video to factory rear-view camera is only possible while the reverse gear is engaged. To delay the switch-back an additional electronic part is required. |
| PDC and guidelines | If the video interface does not receive the required information from the vehicle CAN-bus, neither moving guide-lines nor PDC will be supported. |
Specifications:
| BATT/ACC range | 7V – 25V |
| Stand.by power drain | <10mA |
| Power | 0.7A@12V |
| Video input | 0.7V˜1V |
| Video input formats | NTSC |
| Temperature range | -40°C to +85°C |
| Dimensions video-box | 154 x 22 x 92 mm (W x H x D) |
Connections:
- Video-insertion: 4-pin HSD
- Power and CAN-bus: Plug & play
- Video-input: RCA connector
- Rear-view camera-input: RCA connector
- front-view camera-input: RCA connector
Remember that in some states it is illegal to use the video in motion while driving!
The manufacturer of this item, and the administrator of this site will not be responsible for any damage to persons or property caused by improper use or in terms contrary to the laws.
| Ford | C-Max, Transit, S-Max, Ranger 2016, Mondeo, Kuga, Galaxy, Fiesta |
| Category | Rear View Camera Interfaces, Video integration |
