Cart
0 Product: Products: (empty)
No products
To be determined Shipping
€ 0,00 Tax
€ 0,00 Total
Prices are tax included
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products (tax incl.)
Total shipping (tax incl.) To be determined
Tax: € 0,00
Total (tax incl.)
Valutazione: Scrivi per primo una recensione!
Video interface for Ford SYNC3 with plug&play harness
The r.LINK interface allows to connect a rear-view camera and two additional video-sources (e.g. DVD-player, DVB-T tuner, ...) to the factory-infotainment system.
Product features:
- Video-insertion
- 2 video-inputs for after-market devices (e.g. DVD-Player, DVB-T tuner, .)
- Rear-view camera video-input
- Automatic switching to rear-view camera input on engagement of reverse gear
- Activatable parking guide lines for rear-view camera (not available for all vehicles)
- Video-in-motion (ONLY for connected video-sources)
- AV-inputs NTSC compatible only
Compatibility:
| Model | Navigation |
|---|---|
| C-Max model year from 2018, Ecosport model year from 2017, Fiesta from 07/2017, Focus model years from 2017 til 2021, Galaxy model year from 2016, Kuga3 model years from 2018 til 2024, Mondeo model year from 2017, Mustang6 from 08/2017 til 04/2023, Puma2, Ranger from 02/2016 til 02/2023, S-Max model year from 2016, Tourneo Custom from 2018 til 07/2023, Transit model year from 2017, Transit Custom from facelift 2018 tis 07/2023, and other vehicles with | Sync3 full version with APIM and with 7inch or 8inch tablet or non-table monitor |
| Tourneo Courier from 10/2023, Transit Courier from 10/2023 | Sync4 full version with APIM with horzontal 8inch monitor |
| Ranger from 10/2022 | Sync4 full version with APIM with vertical 10.1inch monitor Not compatible with Sync4 with vertical 12inch monitor. The HDV-SY4 is the appropriate interface for this. |
Limitations:
| Video only | The interface inserts ONLY video signals into the infotainment. For inserting Audio signals either the possibly existing factory audio- AUX-input or a FM-modulator can be used. In case that 2 AV sources shall be connected, a desired audio switching will require additional electronic. |
| Inserted video picture at vertical monitors | To ensure a better picture quality, the inserted video picture is displayed on the upper half of the monitor (only Ford Ranger with Sync4 and vertical 10.1inch monitor). |
| Factory rear-view camera | Automatically switching-back from inserted video to factory rear- view camera is only possible while the reverse gear is engaged. To delay the switch-back an additional electronic part is required. |
| After market front camera | The front camera will automatically be switched for 10 seconds after disengaging the reverse gear. A manually front camera switching is possible by external keypad. |
| Guidelines and PDC | Displayed guidelines and the optical PDC are not available in all vehicles. |
| Video input signal | NTSC video sources compatible only. |
Specifications:
| BATT/ACC range | 7V – 25V |
| Stand.by power drain | <10mA |
| Power | 0.7A@12V |
| Video input | 0.7V˜1V |
| Video input formats | NTSC |
| Temperature range | -40°C to +85°C |
| Dimensions video-box | 154 x 22 x 92 mm (W x H x D) |
Connections:
- Video-insertion: 4-pin HSD
- Power and CAN-bus: Plug & play
- Video-input: RCA connector
- Rear-view camera-input: RCA connector
- front-view camera-input: RCA connector
Remember that in some states it is illegal to use the video in motion while driving!
The manufacturer of this item, and the administrator of this site will not be responsible for any damage to persons or property caused by improper use or in terms contrary to the laws.
| Ford | Edge, Fiesta, Galaxy, Kuga, Ranger 2016, S-Max, Transit |
| Category | Rear View Camera Interfaces, Video integration |
