New Video interface for Ford SYNC3 Light Expand

Video interface for Ford SYNC3 Light

Ford Ford



Video interface for Ford SYNC3 Light with plug&play harness

More details

shipped in 24 h

€ 277,87

tax incl.

Worldwide shipping

24/48h Delivery

Secure payment

Car electronic experts since 1990

Video interface for Ford SYNC3 Light with plug&play harness

The r.LINK interface allows to connect a rear-view camera and two additional video-sources (e.g. DVD-player, DVB-T tuner, ...) to the factory-infotainment system.

Product features:

  • Video-inserter for factory-infotainment systems
  • 1 CVBS rear-view camera video-input
  • 1 CVBS front camera video-input
  • 2 CVBS video-inputs for after-market devices (e.g. USB-Player, DVB-T2 tuner, ...)
  • Automatic switching to rear-view camera input on engagement of the reverse gear
  • Automatic front camera switching after reverse gear for 10 seconds
  • Activatable parking guide lines for rear-view camera (not available for all vehicles)
  • Video-in-motion (ONLY for connected video-sources)
  • Video-inputs PAL and NTSC compatible



ModelRadio / Navigazione
 Galaxy from 2016

Ford SYNC3 Light (R5)  6.5", 7" ed 8"  monitors

Sync Connected Radio version with 4inch monitor

 Focus from 2017
 C-Max from 2018
 Kuga from 2018
 Mondeo from 2017
 Mustang da 2017
 Ranger from 2017
 S-Max from 2016
 Tourneo Custom
 Tourneo Connect
 Ecosport from 2017
 Fiesta from 07/2017 (MY2018)
 Transit Custom from 2017
 Altri veicoli con SYNC3



Video onlyThe interface inserts ONLY video signals into the infotainment. For inserting Audio signals either the possibly existing factory audio-AUX-input or a FM-modulator can be used.
Picture formatOnly compatible with NTSC
Factory rear-view cameraAutomatically switching-back from inserted video to factory rear-view camera is only possible while the reverse gear is engaged. To delay the switch-back an additional electronic part is required.
PDC and guidelinesIf the video interface does not receive the required information from the vehicle CAN-bus, neither moving guide-lines nor PDC will be supported.



BATT/ACC range7V – 25V power drain<10mA
Video input0.7V˜1V
Video input formatsNTSC
Temperature range-40°C to +85°C
Dimensions video-box154 x 22 x 92 mm (W x H x D)


  • Video-insertion: 4-pin HSD
  • Power and CAN-bus: Plug & play
  • Video-input: RCA connector
  • Rear-view camera-input: RCA connector
  • front-view camera-input: RCA connector


Remember that in some states it is illegal to use the video in motion while driving!

The manufacturer of this item, and the administrator of this site will not be responsible for any damage to persons or property caused by improper use or in terms contrary to the laws.

FordC-Max, Transit, S-Max, Ranger 2016, Mondeo, Kuga, Galaxy, Fiesta
CategoryRear View Camera Interfaces, Video integration