No products
Prices are tax included
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
Multimedia-interface for the connection of one AV-source to the factory-navigation. With remote function for connected devices, rear-view camera-input and trigger signals.
The CI-C1-NTG2 multimedia interface allows to connect one AV-source (after-market devices e.g. DVD player, DVB-T tuner) to the factory navigation system of the vehicle manufacturer. Very simple connection to the vehicle with the "Plug & Play" harness. If the AV-source is in the list of compatible devices, it is possible to control the AV-source by the factory infotainment. Additionally the connection of a rear-view camera is possible.
Product features:
- Full plug and play multimedia interface
- 1 AV-input with separate IR-control channels
- Controls of after-market devices (e.g. DVD-player, DVD-changer, ...) by factory infotainment
- After-market rear-view camera input
- Rear-view camera power (+12V max. 1A)
- Power-on remote-out trigger-signal (+12V max 1A) to switch on connected devices
Compatibility:
Compatible with Mercedes Benz vehicles with Comand APS and NTG1 Comand APS NTG2 navigation systems and with green Fakra-connector.
(From approx week 6 of 2004 (NTG1) and accordingly from approx 11/2007 (NTG2) it was left out on vehicles which were delivered without factory TV-tuner or factory RVC).
| Model | Radio / Navigation |
| CLS Coupè (W219) 10/2004 - 03/2008 | Comand APS NTG1 |
| E-Class (W211) til 05/2008 | |
| SLK-Class (R171) 03/2004 - 03/2008 | |
| A-Class (W169) 09/2004 - 06/2008 | Comand APS NTG2 |
| B-Class (W245) 09/2004 - 06/2008 | |
| C-Class (W203) 04/2004 - 02/2007 | |
| CLC-Class (CL203) 06/2008 - 09/2008 | |
| CLK-Class (C209/W209) from 06/2004 | |
| G-Model (G463) 04/2007 - 08/2008 | |
| GL-Class (X164) til 06/2008 | |
| ML-Class (W164) til 06/2008 | |
| R-Class (W251) til 06/2008 | |
| Sprinter | |
| Viano |
| Factory TV tuner | Must NOT be installed. If uninstalled, optical ring must be closed. |
| After-market rear-view camera | Automatic switching from OEM modes to camera only works after coding the Comand at dealershihp (only possible on vehicles for wich factory rear-view camera is offered, not possible for vehicles with Comand APS NTG1). Optionally available adapter CAB-TVAS20 is necessary to connect. |
| No MOST®-component | If the vehicle is without factory MOST®-components, the MOST®-ring needs to be opened by diagnosis computer. |
Specifications(interface-box)
| Operation voltage | 10.5 – 14.8V |
| Stand-by power drain | <1mA |
| Operation power drain | 180mA |
| Power consumption | 2.5W |
| Temperature range | -30°C to +80°C |
| Weight | 95g |
| Measurements | 106 x 30 x 71 mm (W x H x D) |
Connections (Interface-box)
| FRONTE | RETRO |
| 3 female RCA connector (2x Audio In, Video In) | male 4pin Molex connector |
| male 8pin Molex connector | |
| Female MOST®-connector |
Delivery contents
- Interface-box
- Plug & play Harness
Remember that in some states it is illegal to use the video in motion while driving!
The manufacturer of this item, and the administrator of this site will not be responsible for any damage to persons or property caused by improper use or in terms contrary to the laws.
| Mercedes | A Class W169, Viano W639, Sprinter, CLS W219, CLK W209, Class SLK R171, Class R V251, Class M W164, Class GL X164, Class E W211, CLC Class CL203, Class C W203 , Class B W245 |
| Category | Rear View Camera Interfaces, Video integration |
