Multimedia-interface for the connection of one AV-source to the factory-navigation. With remote function for connected devices, video-in-motion and trigger signals. For vehicles WITH factory rear-view camera WITHOUT control-box.
Warning: Last items in stock!
Available from approx
Audio - Video input interface for Skoda Columbus, RNS510, RNS810, Trinax with factory RVC without camera control box.
The CI-C1-MFD3-R4 multimedia interface allows to connect one AV-source (after-market devices e.g. DVD player, DVB-T tuner) to the factory navigation system of the vehicle manufacturer. Very simple connection to the vehicle with the "Plug & Play" harness. If the AV-source is in the list of compatible devices, it is possible to control the AV-source by the factory infotainment. Video-in-motion is included.
|Model||Radio / Navigation|
|Octavia 3 (A7)|
|Superb 3 (3V)|
|Factory TV tuner||Must NOT be installed|
|Operation voltage||10.5 – 14.8V|
|Stand-by power drain||<1mA|
|Operation power drain||240mA|
|Temperature range||-30°C to +80°C|
|Measurements||106 x 30 x 71 mm (W x H x D)|
|2 female RCA connector (Video In, R-Cam)||male 4pin Molex connector|
|male 12pin Molex connector|
Remember that in some states it is illegal to use the video in motion while driving!
The manufacturer of this item, and the administrator of this site will not be responsible for any damage to persons or property caused by improper use or in terms contrary to the laws.
|Skoda||Fabia NJ, Octavia A7|
|Category||Video integration, Video in Motion|