Video inserter for front- and rear-view camera and another video-source.Compatible with Toyota vehicles with GVIF technology.
Warning: Last items in stock!
Video inserter compatible with Toyota vehicles with GVIF technology. For connection of a front-, rear-view camera and another video source.
|Land Cruiser||Monitor and head-unit must be saparate units and connected with a GVIF-cable|
|vehicles with GVIF-technology 2007 >|
|Video only||The interface inserts ONLY video signals into the infotainment. For inserting Audio signals either the possibly existing factory audio-AUX-input or a FM-modulator can be used.|
|Factory rear-view camera||Automatic switching-back from inserted video to factory rear-view camera is only possible while the reverse gear is engaged. To delay the switch-back an additional electronic part is required.|
|Video Sources||Only compatible to NTSC Video Sources.|
|Operation voltage||7V – 25V|
|Stand-by power drain||<10mA|
|Video input||0.7V - 1V|
|Video input formats||NTSC|
|RGB-video amplitude||0.7V with 75 Ohm impedance|
|Temperature range||-40°C to +85°C|
|Dimensions||113×22×92 mm (W×H×D)|
Remember that in some states it is illegal to use the video in motion while driving!
The manufacturer of this item, and the administrator of this site will not be responsible for any damage to persons or property caused by improper use or in terms contrary to the laws.
|Toyota||Land Cruiser, Prius|
|Category||Rear View Camera Interfaces, Video integration|