Cart
0 Product: Products: (empty)
No products
To be determined Shipping
€ 0,00 Tax
€ 0,00 Total
Prices are tax included
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products (tax incl.)
Total shipping (tax incl.) To be determined
Tax: € 0,00
Total (tax incl.)
AUDI TT Rear-view camera exchange license-plate illumination with guide-lines and cold-white LED
CI-VS3-AU24W-AU
New
AUDI TT Rear-view camera exchange license-plate illumination with guide-lines and cold-white LED
Mini-camera with vehicle specific license plate light with cold-white LED.
Simple installation due to replacement with the factory license plate light.
Professional set of system cables in adequate length and with automotive connectors.
Due to connectors with a small diameter the cable can easily be laid.
An additional cable core for signal transfer e.g. power supply or reversing signals.
Guidelines can be disabled.
Compatible with:
NOTE:
Please check the size indications and the pictures of the camera for the compatibility with the vehicle, before buying!
Properties:
Dimensions:
Simple installation due to replacement with the factory license plate light.
Professional set of system cables in adequate length and with automotive connectors.
Due to connectors with a small diameter the cable can easily be laid.
An additional cable core for signal transfer e.g. power supply or reversing signals.
Guidelines can be disabled.
Compatible with:
- Audi TT
NOTE:
Please check the size indications and the pictures of the camera for the compatibility with the vehicle, before buying!
Properties:
- Mini-camera with vehicle-specific number-plate illumination-glass
- Water resistance IP69K
- Sensor-type 1/3inch CMOS NTSC colour
- Resolution 800 TV lines
- Sensitivity 0.01Lux F1.2
- Angle horizontal 120°, vertical 100°, diagonal 170°
- Mirrored image (fixed)
- Guide lines, optionally disengageable
- Camera-cable 1.8m with 4pin 3V system-female connector (diameter 5.9mm)
- Extension cable 4pin 3V, 8m with wire for signal throughput
- System-connector system cable 4pin 3V with RCA connector and fuse
Dimensions:
- Overall L/W/D 76 x 32.5 x 38 mm
- Cover glass L/W/D 76 x 32.5 x 19 mm
- Build-in hole L/D 58 x 25 mm
- Hole spacing 54 mm
| BATT/ACCrange | 6V - 26V |
| Power | 0.05A 12V |
| Power consumption | 0.6W |
| Weight incl. cable | 198g |
| Operating temperature | -30°C to +70°C |
| Audi | TT, TT 8J, TT 8N, TT 8S |
| Category | Cameras RVC |
