Cart
0 Product: Products: (empty)
No products
To be determined Shipping
€ 0,00 Tax
€ 0,00 Total
Prices are tax included
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products (tax incl.)
Total shipping (tax incl.) To be determined
Tax: € 0,00
Total (tax incl.)
AUDI Rear-view camera exchange license-plate illumination with guide-lines for Audi A4
CI-VS3-AU23-AU
New
AUDI Rear-view camera exchange license-plate illumination with guide-lines for Audi A4
Valutazione: Scrivi per primo una recensione!
Mini-camera with vehicle specific license plate light.
Simple installation due to replacement with the factory license plate light.
Professional set of system cables in adequate length and with automotive connectors.
Due to connectors with a small diameter the cable can easily be laid.
An additional cable core for signal transfer e.g. power supply or reversing signals.
Guidelines can be disabled.
Compatible with:
NOTE:
Please check the size indications and the pictures of the camera for the compatibility with the vehicle, before buying!
Properties:
Dimensions:
Simple installation due to replacement with the factory license plate light.
Professional set of system cables in adequate length and with automotive connectors.
Due to connectors with a small diameter the cable can easily be laid.
An additional cable core for signal transfer e.g. power supply or reversing signals.
Guidelines can be disabled.
Compatible with:
- Audi A4 OEM lamp
NOTE:
Please check the size indications and the pictures of the camera for the compatibility with the vehicle, before buying!
Properties:
- Mini-camera with vehicle-specific number-plate illumination-glass
- Water resistance IP69K
- Sensor-type 1/3inch CMOS NTSC colour
- Resolution 800 TV lines
- Sensitivity 0.01Lux F1.2
- Angle horizontal 120°, vertical 100°, diagonal 170°
- Mirrored image (fixed)
- Guide lines, optionally disengageable
- Camera-cable 1.8m with 4pin 3V system-female connector (diameter 5.9mm)
- Extension cable 4pin 3V, 8m with wire for signal throughput
- System-connector system cable 4pin 3V with RCA connector and fuse
Dimensions:
- Overall L/W/D 101 x 32.5 x 53 mm
- Cover glass L/W/D 76 x 32.5 x 41 mm
- Installation opening L/W 54 x 24 mm
- Hole spacing 56.5 mm
| BATT/ACCrange | 10V - 15V |
| Power | 0.05A |
| Power consumption | 0.6W |
| Weight incl. cable | 195g |
| Operating temperature | -30°C to +70°C |
| Audi | A4 / S4, A4 8D, A4 8E, A4 8K, A4 B9 |
| Category | Cameras RVC |
