Video inserter for front - and rear-view camera and 2 video-sources.
Compatible with Porsche vehicles generation PCM 5.0
Warning: Last items in stock!
Video inserter for rear-view camera, front camera with auto switching and 2 video-sources. Compatible with Porsche PCM 5.0
|Cayenne from MY2018||PCM 5.0 (Alpine) with 12.3inch monitor|
| Macan from MY2019|
|Video only||The interface inserts ONLY video signals into the infotainment. For inserting Audio signals either the possibly existing factory audio-AUX-input or a FM-modulator can be used. If 2 audio sources shall be connected to the infotainment, an additional electronic is necessary to switch them.|
|Factory rear-view camera||Automatically switching-back from inserted video to factory rear-view camera is only possible while the reverse gear is engaged. To delay the switch-back an additional electronic part is required.|
|After market front camera||The front camera will automatically be switched for 10 seconds after disengaging the reverse gear. A manually front camera switching is possible by external keypad.|
|Video input signal||Only NTSC video sources compatible.|
|Operation voltage||7V – 25V|
|Stand-by power drain||<10mA|
|Video input||0.7V - 1V|
|Video input format||NTSC|
|RGB-video amplitude||0.7V with 75 Ohm impedance|
|Temperature range||-40°C to +85°C|
|Dimensions video-box||117×25×103 mm (W×H×D)|
Remember that in some states it is illegal to use the video in motion while driving!
The manufacturer of this item, and the administrator of this site will not be responsible for any damage to persons or property caused by improper use or in terms contrary to the laws.
|Porsche||Cayenne (E2), Macan|
|Category||Rear View Camera Interfaces, Video integration|