Porsche Macan 2019- vehicle-specific rear-view camera

Porsche Macan 2019- vehicle-specific rear-view camera for factory camera position above the licence plate.

Vehicle-specific rear-view camera for factory camera position above the licence plate. Suitable for Porsche Macan from 2019. Camera with adjustable ball head Professional connector cable with enough length and automotive plug connection. Easy to lay the cable due to a small cable diameter.

Compatible with:

• Porsche Macan 2019-

NOTE:
Please check the size indications and the pictures of the camera for the compatibility with the vehicle, before buying!


Features:

• Mini ball rear-view camera NTSC (black)
• Incl. vehicle-specific housing for factory camera position above the licence plate
• System cable with throughput wire
• Sensor type CMOS 1/4 inch HD low-light sensitive
• Bezel F1.2
• Light sensitivity 0.01Lux, 800 TV lines
• Angle horizontal=180°, vertical=125°, diagonal=210° (on request also camera with horizontal 168°, vertical 118°, diagonal 188° possible)
• Guide-lines can be switched off
• Guide-lines' width selectable between car or truck
• Protection class IP69K
• Suitable for permanent operation (connection to ACC)
• Video connection: RCA male connector
• System cable of camera: 4pin 3V

Attention:
For installation, it is required to cut out a part a reserved piece of the bumper (same as retrofitting the factory rear-view camera).

Dimensions:

• 51 x 31 x 57mm (W x H x D)