Multimedia-interface for the connection of one AV-source to the factory-navigation. With remote function for connected devices, video-in-motion and trigger signals. For vehicles WITH factory rear-view camera WITH control-box.
Warning: Last items in stock!
Audio - Video input interface for Volkswagen RNS510, RNS810 with factory RVC and camera control-box.
The CI-C1-MFD3-R3 multimedia interface allows to connect one AV-source (after-market devices e.g. DVD player, DVB-T tuner) to the factory navigation system of the vehicle manufacturer. Very simple connection to the vehicle with the "Plug & Play" harness. If the AV-source is in the list of compatible devices, it is possible to control the AV-source by the factory infotainment. Video-in-motion is included.
|Model||Radio / Navigation|
|Phaeton from 04/2010|
|Factory TV tuner||Must NOT be installed|
|Operation voltage||10.5 – 14.8V|
|Stand-by power drain||<1mA|
|Operation power drain||240mA|
|Temperature range||-30°C to +80°C|
|Measurements||106 x 30 x 71 mm (W x H x D)|
|2 female RCA connector (Video In, R-Cam)||male 4pin Molex connector|
|male 12pin Molex connector|
Remember that in some states it is illegal to use the video in motion while driving!
The manufacturer of this item, and the administrator of this site will not be responsible for any damage to persons or property caused by improper use or in terms contrary to the laws.
|Volkswagen||Passat, Phaeton, Tiguan, Touareg, Transporter T5|
|Category||Video integration, Video in Motion|