No products
Prices are tax included
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
Multimedia-interface for the connection of one AV-source to the factory-navigation. With remote function for connected devices, rear-view camera-input, video-in-motion and trigger signals.
The CI-C1-MFD1 multimedia interface allows to connect one AV-source (after-market devices e.g. DVD player, DVB-T tuner) to the factory navigation system of the vehicle manufacturer. Very simple connection to the vehicle with the "Plug & Play" harness. If the AV-source is in the list of compatible devices, it is possible to control the AV-source by the factory infotainment. Additionally the connection of a rear-view camera is possible.
Product features:
- Full plug and play multimedia interface
- 1 AV-input with separate IR-control channels
- Controls of after-market devices (e.g. DVD-player, DVD-changer, ...) by factory infotainment
- After-market rear-view camera input
- Automatic switching to rear-view camera input (on older MFD1 only from c.LOGiC mode)
- Rear-view camera power (+12V max. 1A)
- Power-on remote-out trigger-signal (+12V max 1A) to switch on connected devices
Compatibility:
Compatible with Audi vehicles with Audi Navi Plus RNS-D (4:3) navigation system.
| Model | Radio / Navigation |
| A3 1996 > 2004 | Audi Navi Plus RNS-D (4:3) |
| A4 1994 > 2004 | |
| A6 1997 > 2004 | |
| A8 1994 > 2004 | |
| TT 1998 > 2004 |
| Factory TV tuner | Must NOT be installed |
| After-market rear-view camera | Automatic switching on RNS-D and on older MFD1 to camera only works from usbLOGiC mode. On newer MFD1 automatic switching works also from OEM modes. |
Specifications(interface-box)
| Operation voltage | 10.5 – 14.8V |
| Stand-by power drain | <1mA |
| Operation power drain | 240mA |
| Power consumption | 3W |
| Temperature range | -30°C to +80°C |
| Weight | 95g |
| Measurements | 106 x 30 x 71 mm (W x H x D) |
Connections (Interface-box)
| FRONT | REAR |
| 2 female RCA connector (Video In, R-Cam) | male 4pin Molex connector |
| male 12pin Molex connector |
Delivery contents
- Interface-box
- Plug & play Harness
Remember that in some states it is illegal to use the video in motion while driving!
The manufacturer of this item, and the administrator of this site will not be responsible for any damage to persons or property caused by improper use or in terms contrary to the laws.
| Audi | A3 8L, A4 / S4, A4 8D, A6 4B, A8 / S8, TT 8N |
| Category | Rear View Camera Interfaces, Video integration |
