CI-RL4-MBN6
New
Video inserter for front - and rear-view camera and 2 video-sources.
Compatible with Mercedes Benz vehicles generation NTG6 - MBUX with Comand Online.
Warning: Last items in stock!
Available from approx
Video inserter for rear-view camera, front camera with auto switching and 2 video-sources. Compatible with Comand Online NTG6 - MBUX with 7inch and 10.25inch monitor
Product features
Modello | Radio/Navigazione |
A (W177) from 05/2018 | NTG6 - MBUX with 7inch monitor |
B (W247) from 12/2018 | |
Citan (W420) from 10/2021 | |
CLA Coupè (C118) from 03/2019 | |
CLA Shooting B (X118) from 07/2019 | |
GLB (X247) from 09/2019 | |
GLC (X253) from 2019 | |
T-class (W420) from 2022 | |
A (W177) from 05/2018 | Comand Online NTG6 - MBUX with 10.25inch or 12inch monitor |
B (W247) from 12/2018 | |
CLA Coupè (C118) from 03/2019 | |
CLA Shooting B (X118) from 07/2019 | |
E-class (W213) from about 06/2020 | |
EQC (N293) from MY2019 | |
GLA (H247) from 02/2020 | |
GLB (X247) from 09/2019 | |
GLC (X253) da 2019 | |
GLE Coupè (C/W167) from MY2019 | |
GLS (X166) from MY2019 | |
V (W447) from about 03/2020 | |
Sprinter (W907 / W910) dal 2018 | NTG6 - MBUX with 7inch or 10.25inch monitor |
Video only | The interface inserts ONLY video signals into the infotainment. For inserting Audio signals either the possibly existing factory audio-AUX-input or a FM-modulator can be used. If 2 audio sources shall be connected to the infotainment, an additional electronic is necessary to switch them. |
Factory rear-view camera | Automatically switching-back from inserted video to factory rear-view camera is only possible while the reverse gear is engaged. To delay the switch-back an additional electronic part is required. |
After market front camera | The front camera will automatically be switched for 10 seconds after disengaging the reverse gear. A manually front camera switching is possible by external keypad. |
Video input signal | Only NTSC video sources compatible. |
Guide lines | Available only for vehicles with 7inch monitor, not for 10inch monitor. If the interface does not receive the required information from the vehicle guide lines wont be supported. |
Operation voltage | 7V – 25V |
Stand-by power drain | <10mA |
Video input | 0.7V - 1V |
Video input format | NTSC |
RGB-video amplitude | 0.7V with 75 Ohm impedance |
Temperature range | -40°C to +85°C |
Dimensions video-box | 119×24×95 mm (W×H×D) |
Remember that in some states it is illegal to use the video in motion while driving!
The manufacturer of this item, and the administrator of this site will not be responsible for any damage to persons or property caused by improper use or in terms contrary to the laws.
Mercedes | Class A W177, Class B W247, GLC X253, Sprinter |
Category | Rear View Camera Interfaces, Video integration |